Component matching guide
A visible 15FEA label is a useful component reference, but it does not confirm that a decorative zinc alloy cap will fit every perfume bottle that uses the same neck wording. Use this guide to shortlist the photographed DS-180, DS-225, DS-198-2, DS-161 and DS-245 cap directions, then review the bottle neck, sprayer, collar, cap insert, assembled height and fitted box as one project. Final physical fit, finish, quantity, availability, MOQ and timing require confirmation for the exact assembly.
Buyer decisions
Send the bottle SKU, neck drawing or approved sample reference with the photographed 15FEA cap model. Shared neck wording is a starting point for review, not evidence that every bottle, pump and cap insert are interchangeable.
The cap connects to an insert and sits above the sprayer and collar. Confirm retention, clearance and the visible transition across all components instead of choosing the zinc alloy shell by appearance alone.
Dip-tube length and spray behavior belong to the selected sprayer and bottle configuration. The decorative cap image does not establish those functional requirements, so include the fill product and pump direction in the project brief.
Square, hexagonal, asymmetric and crown-shaped caps create different assembled heights and orientation requirements. Review the selected model with bottle decoration, logo direction and the planned protective insert before approving the retail pack.
Include the exact cap image, bottle SKU or drawing, neck route, sprayer and collar direction, required finish, quantity, destination, box needs and target timing. OULU can then define the applicable sample and confirmation route without assuming unverified compatibility.
Photographed 15FEA cap starting points
These five complete English-labeled PNG references are exact copies of the supplied files. They document model and appearance directions for a compatibility enquiry; they do not represent universal fit or live inventory.
15FEA DS-180
Use the DS-180 photograph when a compact textured hexagonal direction fits the intended bottle and box proportions.
Review DS-180 →
15FEA DS-225
The broad square top should be checked for shoulder balance, orientation and fitted-box clearance on the selected bottle.
Review DS-225 →
15FEA DS-198-2
Keep the radial metal form and photographed green center detail together when requesting this model direction.
Review DS-198-2 →
15FEA DS-161
Confirm the directional surface and curved profile against bottle decoration and the intended front-facing orientation.
Review DS-161 →
15FEA DS-245
The taller rounded crown direction requires an assembled-height and protective-packaging review before approval.
Review DS-245 →Product starting points
OULU-PB0149 · 15ml
OULU-PB0150 · 15ml
OULU-PB0151 · 15ml
OULU-PB0301 · 30ml
Explore related bottles
Complete the packaging system
Frequently asked questions
No. The visible 15FEA wording is a starting reference. The exact bottle neck, sprayer, collar, cap insert and assembled fit still require confirmation.
Review the bottle, sprayer or pump, collar, cap insert and zinc alloy shell as one physical assembly, then confirm the fitted-box clearance if a retail pack is required.
No. They document the visible cap model and 15FEA label. The internal insert and retention route must be confirmed for the selected assembly.
Use appearance to shortlist a model, then verify physical fit, orientation, assembled height, finish and packaging clearance against the intended bottle.
Send the exact cap image, bottle SKU or drawing, neck reference, pump and collar direction, finish, quantity, destination, box needs and target timing.
Start with your requirements
Include capacity, quantity, destination, finish, components and target timing.