A 60ml fill volume does not create one standard exterior size

Sixty millilitres describes nominal capacity, not one standard exterior size. OULU-PB0601 has a tall rectangular body and black rectangular cap; OULU-PB0602 has a slimmer body and broad clear T-shaped cap; OULU-PB0603 has a wider, lower body and gold-tone cylindrical cap. The table transcribes the measurements shown on each product photograph.

Use each row only for its exact SKU and photographed configuration. These reference measurements are not manufacturing tolerances or approved packaging cavity sizes. The 60ml perfume bottle collection presents the complete group for wholesale shortlisting; this guide focuses on how to compare and use the shown dimensions.

Image-confirmed dimensions for three published 60ml OULU references
SKUCapacityWidthDepthBottle bodyOverall
OULU-PB060160ml53mm34mm116mm138mm
OULU-PB060260ml45mm26mm103mm122mm
OULU-PB060360ml71mm33mm83mm104mm

60ml bottle size in hand: compare the measurements in centimetres

To picture a 60ml perfume bottle in your hand, compare the exact exterior measurements rather than the fill volume. The three photographed references are 10.4–13.8cm overall, with shown bottle widths of 4.5–7.1cm. The centimetre values below are direct conversions of the same millimetre labels above, not new measurements.

Compare these dimensions with a ruler before shortlisting a shape. Hands vary, and these product photographs are not a universal hand-scale or pocket-fit demonstration. Shown bottle width does not include any unmeasured projecting closure; request a sample and confirm the complete assembly before deciding on grip, carrying fit or packaging.

The same three 60ml reference dimensions converted from mm to cm
SKUShown widthShown depthShown overall height
OULU-PB06015.3cm3.4cm13.8cm
OULU-PB06024.5cm2.6cm12.2cm
OULU-PB06037.1cm3.3cm10.4cm

Read body height and overall height separately for each SKU

PB0601 shows 116mm bottle-body height and 138mm overall height. PB0602 shows 103mm and 122mm; PB0603 shows 83mm and 104mm. Each overall height includes the photographed closure configuration. For a shelf-height check or box review, retain both values and identify which measurement belongs to the glass body and which belongs to the pictured assembly.

If the cap, pump or collar changes, the final assembled height and shoulder clearance can also change. Do not subtract or add a generic component allowance. Confirm the intended assembly, then use the resulting assembled dimensions for the approved packaging structure.

Approximately 2.0 US fl oz describes capacity, not package footprint

A 60ml fill is approximately 2.0 US fluid ounces. That conversion can help a buyer communicate the nominal volume, but it does not answer how much shelf, tray or shipping space the product needs. Exterior footprint depends on the glass distribution, profile, base, shoulder, neck and selected closure.

PB0602 has the smallest shown body width and depth in this three-reference group, at 45mm and 26mm. PB0603 has the lowest shown overall height, at 104mm, but the widest body, at 71mm. PB0601 is the tallest, at 138mm overall. The image labels do not establish the maximum width of a projecting cap, so measure the complete approved assembly before making a box or insert.

How many sprays are in 60ml of perfume?

There is no fixed spray count for every 60ml perfume bottle. For an arithmetic estimate, divide the usable liquid volume in millilitres by the pump output in millilitres per complete actuation. Using 60ml as the calculation volume, 60 ÷ 0.07 is approximately 857, while 60 ÷ 0.13 is approximately 462.

OULU offers nominal 0.07cc (70μL) and 0.13cc (130μL) extended-spray options for 15FEA projects. These are two examples of pump output, not specifications for PB0601, PB0602 or PB0603. Their exact neck and component compatibility must be confirmed separately. See the 70μL and 130μL long-spray options for product details.

The figures are theoretical calculations, not guaranteed usable spray counts or a prediction of how many days a bottle will last. Actual fill, priming, liquid left in the bottle, formulation, pump variation and partial presses can change the result. Approve the selected pump on an assembled sample.

Theoretical 60ml spray-count examples, not tested counts for the pictured bottle SKUs
Example nominal pump outputCalculation using 60mlApproximate result
0.07ml / 70μL per full actuation60 ÷ 0.07857 actuations
0.13ml / 130μL per full actuation60 ÷ 0.13462 actuations

Match the pump, collar and cap before finalizing the assembled size

The black rectangular, clear T-shaped and gold-tone cylindrical caps are photographed visual directions, not interchangeable components. Carry the chosen PB0601, PB0602 or PB0603 reference into the sprayer and collar review and the cap review, then confirm the neck system, pump, dip tube, collar, insert and finished assembly. A pictured finish does not establish the cap material or neck specification.

If the requested component direction differs from the photographed configuration, identify that change in the enquiry. Final compatibility, spray behavior, finish and availability must be reviewed against the exact bottle and project scope rather than inferred from this dimension guide.

Plan decoration and the box around the exact rectangular profile

The tall PB0601, slim PB0602 and wide PB0603 profiles offer different front-panel proportions. Exterior width is not the usable printing area: edges, curves and shoulder transitions still need artwork review. Send the logo dimensions, artwork status, color reference and intended decoration route with the exact SKU.

For the outer pack, begin with the sufficiently confirmed assembled width, depth and height, then add the required retention, finger access, protection and opening direction. Use the box types and inserts guide to compare structures, but do not copy a cavity from another 60ml bottle or finalize a carton from nominal capacity alone.

Carry the selected 60ml SKU into one packaging brief

Send the exact SKU, estimated quantity, destination, intended pump and cap, decoration direction, box or insert requirement, artwork status and target timing. State whether you want the pictured closure or a different direction, and identify any measurement or compatibility point that still needs confirmation.

To request a quote for a specific model, use its enquiry button in the 60ml reference cards.

Use the packaging RFQ checklist to separate confirmed requirements from preferences. Live availability, MOQ, component fit, sampling route, price and schedule are confirmed for the selected SKU and approved project scope rather than inferred from this page.