How big is a 25ml perfume bottle outside?
Twenty-five millilitres describes nominal fill volume, not one standard bottle footprint. Across the thirteen published OULU references, shown width ranges from 31mm to 52mm, bottle-body height ranges from 46mm to 78mm and shown overall height ranges from 65mm to 98mm. Shape, depth, base, shoulder and closure direction all affect the final pack.
Start with the 25ml perfume bottle collection, select the exact SKU and keep that reference beside every measurement. When depth is absent from the supplied image, the comparison records "Not shown" rather than treating width as a substitute.
| SKU | Width | Depth | Bottle body | Overall | Profile direction |
|---|---|---|---|---|---|
| OULU-PB0251 | 41mm | 25mm | 68mm | 97mm | Slim rectangular |
| OULU-PB0252 | 50mm | 33mm | 46mm | 65mm | Low bow-detail rectangular |
| OULU-PB0253 | 52mm | 23mm | 66mm | 88mm | Wide square |
| OULU-PB0254 | 33mm | 33mm | 67mm | 98mm | Tall square |
| OULU-PB0255 | 35mm | Not shown | 65mm | 86mm | Clear cylinder |
| OULU-PB0256 | 31mm | 31mm | 64mm | 92mm | Slim tapered square |
| OULU-PB0257 | 46mm | 23mm | 64mm | 82mm | Flat clear rectangular |
| OULU-PB0258 | 52mm | 21mm | 68mm | 92mm | Wide exposed-sprayer |
| OULU-PB0259 | 39mm | Not shown | 61mm | 78mm | Compact round |
| OULU-PB0260 | 34mm | 22mm | 78mm | 96mm | Slim rounded rectangular |
| OULU-PB0261 | 35mm | Not shown | 65mm | 86mm | Gradient-blue cylinder |
| OULU-PB0262 | 46mm | 23mm | 64mm | 82mm | Glossy-black flat rectangular |
| OULU-PB0263 | 46mm | 23mm | 64mm | 81mm | Matte-black flat rectangular |
Read width, depth and height as one footprint
A buyer comparing only overall height can miss the main packaging difference. OULU-PB0252 is the lowest shown reference at 65mm overall, while OULU-PB0254 reaches 98mm. OULU-PB0256 is the narrowest at 31mm, while OULU-PB0253 and OULU-PB0258 are both 52mm wide but use different depths and closure directions.
Use width and depth together when planning a tray or carton cavity. If the source does not show depth, request the full assembled footprint before finalizing a fitted structure. The published range helps shortlist proportions; it is not a universal 25ml packaging specification.
Separate bottle-body height from overall assembled height
Bottle-body height describes the glass body shown in the supplied image. Overall height includes the photographed cap or exposed sprayer configuration. PB0252 shows a 46mm bottle body and 65mm overall height, while PB0260 shows a 78mm bottle body and 96mm overall height.
Changing the pump, collar or cap may change vertical clearance and insert retention. Use the pictured overall height for comparison, then confirm the intended assembly before approving the retail box or transport pack.
Compare clear, gradient, glossy-black and matte-black finish directions
The thirteen references include clear glass, a blue-to-clear gradient and separate glossy-black and matte-black directions. PB0262 and PB0263 share the same shown 46mm by 23mm footprint, but their finish and one-millimetre overall-height difference remain separate product references.
Treat finish as a project specification. State the target color, coverage, gloss level, logo contrast and approval method rather than assuming that a photograph defines the final production standard. Review the selected route with the exact bottle and artwork.
Match the pump, collar and cap to the exact 25ml SKU
The photographed configurations include domed, pebble-shaped, ribbed, clear, faceted and exposed-sprayer directions. Similar exterior shape or color does not prove component compatibility. Carry the SKU into the sprayer and collar review and the cap review.
Confirm the neck system, pump, dip tube, collar, cap, spray behavior and finished assembly for the selected bottle. If a photographed cap is only a visual direction, identify it that way in the brief and avoid presenting it as an approved universal match.
Plan logo placement and the fitted box around the selected profile
A slim square face, low bow-detail bottle, round cylinder and wide flat rectangular bottle provide different decoration areas. Send logo dimensions, placement, artwork status and color references against the selected SKU. Review printing, coating, frosting, labels or metallic detail on the actual usable surface.
For a fitted insert or carton, begin with sufficiently confirmed assembled width, depth and height, then add retention, access and protection. Use the box types and inserts guide to compare structures without copying a cavity from another 25ml design.
Turn the 25ml shortlist into a quote-ready packaging brief
Send the exact SKU, estimated quantity, destination, pump and cap direction, decoration, box or insert needs, artwork status and target timing. Include the published dimensions and flag any unshown depth or compatibility point that still requires confirmation.
Use the packaging RFQ checklist to separate requirements from preferences. Live stock, MOQ, component fit, sample route, price and schedule are confirmed for the defined project scope rather than inferred from this comparison.
